DEPARTMENT OF MECHANICAL ENGINEERING

SL Name of the Faculty Designation DEPT Date of Joining  Qualification BPUT Regd. No
1 MR. BIJAYA KUMAR DASH ASST.PROF. MECH 05.11.2015 PG
2 MR. NAYAK HIMANSHU SEKHAR RAY ASSOCIATE-PROF CUM HOD MECH 18.12.2013 PG
3 MR. SAUMYA DARSAN MOHANTY ASSOCIATE-PROFESSOR. MECH 20.07.2015 PG
4 MR. TAPAS KUMAR CHAND ASST.PROF. MECH 05.08.2014 PG
5 MR. AJAYA KUMAR BEURA SR.ASST.PROF. MECH 22.08.2012 PG T132721903
6 MR. NAYANJYOTI BAISHYA ASST.PROF. MECH 02.02.2013 PG T162721902
7 MR. SUBHAKANTA NAYAK ASST.PROF. MECH 09.01.2013 PG T132721901
8 MR. MRUTYUNJAY PARIDA ASST.PROF. MECH 11.08.2014 UG
9 MS. BITHIKA MISHRA ASST.PROF. MECH 07.08.2012 UG T122721907
10 MR. TAPAN KUMAR MALL ASST.PROF. MECH 01.08.2012 UG T122721906
11 MR. ALOK KUMAR NANDA ASST.PROF. MECH 16.09.2013 UG T142721901

Seminar organized by N.H.S.Ray

1. Organized one-day national level seminar on “Recent Advances in thermodynamics and Energy Systems” (RATES-11), 17th August-2011. 2. Organized one-day national level seminar on “National Seminar on Materials Technology” (NSMT-2015), 13th January-2015.

WORKSHOP/Seminar attended by N.J.Baishya

Attended national seminar on “Robotics and its applications”, conducted by Synergy Institute of Engineering & Technology, Orissa.
Participated in Staff Development Programme on “Advances in planning and quality control in manufacturing and service organization” held at SIET, Orissa for two weeks.
Attended “Mission 10X learning approach” conducted by WIPRO for improving teaching skill at GITA Bhubaneswar.
Attended ISTE sponsored National Seminar on “Recent Advance in Manufacturing and Design” conducted by Trident Institute of Technology
Attended “Workshop on Fluid Mechanics conducted by IIT, Kharagpur” held at College of Engineering Bhubaneswar, Orissa for ten days.

SEMINARS CONDUCTED by Prof. S.K.Khuntia

• Convener of National Seminar, AMTMA – 2007, 13th January, Conducted by NMIET, Bhubaneswar.
• Convener of International Symposium ENRON-2010,by NMIET,Bhubaneswar
• Convener of Entrepreneurship awareness programme, 7th and 8th, August, 2010.by NMIET, Bhubaneswar.
• Convener of of 13th annual convection of ISTE, Odisha chapter and national seminar on “Technical education: Current status and future prospects” 15th January 2011 by NMIET, Bhubaneswar.
• Convener of National seminar on Biogas and Biofuel as alternative source of energy, 27 th August, 2013.

IMPORTANT CONFERENCES / SEMINARS ATTENDED by Prof. S.K.Khuntia

Professional development in Technical Education at ITER, Bhubaneswar on 9th Nov, 2001.
Consultation meeting on Review of Undergraduate Education in Engineering and Technology by AICTE at Jadavpur University, Kolkata on 7th June 2003.

SHORT TERM COURSES ATTENDED by Prof. S.K.Khuntia

SL. NO. ORGANISATION PERIOD TRAINING AREA
1 UCE, BURLA 25.06-2001 – 07.07.2001 Information & Technology.
2 UCE, BURLA 24.12.2001 – 28.12.2001 Numerical methods in fluid flow and heat transfer.
3 BPUT, ORISSA 22.11.2003 – 25.11.2003 Principles of organization management concepts,  work culture, Institution Building and teaching at BPUT, Orissa
4 UCE, BURLA 01.03.2004 – 13.03.2004 Advances in environmental science and engineering.
5 UCE, BURLA 15.03.2004 – 27.03-2004 Optimization technique and its application in water resources system planning & management.   
6 Technical Teachers Training Institute  27.04.2004 – 30.04.2004 Induction training 
7 UCE, BURLA 18.06.2007 – 30.06.2007 Application of control system in Mechanical Engineering  
8 KIIT,Bhubaneswar 16.03.2009 – 21.03.2009 Mechanics and Application of Robots
9 IIT,Mumbay 11.12.2012-21.12.2012 Engineering Thermodynamics
10 TAT, Bhubaneswar 7.08.2014- 12/8/2014 Recent advances in smart materials

Sl. No

Year

Name of the seminar

Keynote Speakers

1

2010

National Seminar on New Trends in Mechanical Engg. (NSNTM)

Er. Sishir Kumar Mantry (Scientist, IMMT)

2

2010

SEMINAR ON SELF MANAGEMENT LEADERSHIP

Er. Subhendu Kumar Dash, VISA STEEL

3.

2011

NATIONAL SEMINAR ON RENEWABLE ENERGY AND SUSTAINABLE ENERGY

DR.R N RAY, IOP &
ER. R K DASH, EX ED, PPL

4

2012

SEMINAR ON COATING PROCEDURE USING PLASMA TECHNOLOGY-

ER SISIR MANTRY, SCIENTIST, IMMT

5

2012

Advancement in foundry and forging technology

Dr. Rabindra Behera, SEC

6

2013

NATIONAL SEMIAR ON RECENT ADVANCEMENTS IN MECHANICAL ENGINEERING-

Dr. S.S.MOHAPATRA,
NIT, Rourkela

6

2013

SEMINAR ON TESTING AND EXAMINATION OF LIFTING TACKLES, LIFTING MACHINERY AND PRESSURE VESSELS

ER S.K.DASH, CEB, ER.P.C.PANDA, VBL

7

2014

Workshop on Fluid Mechanics

Conducted by IIT, Kharagpur, through NMEICT

Major B.Tech Projects

SL.NO.

PROJECT NAME

YEAR

1

Retrofitting Of Petrol Engine to L.P.G Engine

2011

2

Fabrication of 1.5 ton cold Storage (Test Rig)

2011

3

Pneumatic Material Handling Equipment

2012

4

Solar Air Compressor

2012

5

Fabrication Of Electric Resistance Furnace

2013

6

Waste Heat Recovery from Refrigeration System

2013

7

White Mushroom Cultivation

2013

8

Biogas

2014

9

Thunder Wagon

2014

10

Rapid Power Movement  (team RPM)

2014

Major M.Tech Projects

SL.NO

THESIS NAME

YEAR

1

Estimation Of Power Generation Potential of Agricultural Based Biomass species

2012

2

Nano Particles Enhancing Sub Cooled Flow Boiling Critical Heat Flux

2012

3

Numerical Analysis Of Micro channel Heat Sink

2013

4

Numerical Study With Heat & Moisture Transfer Panel (HAMP) Model

2014

5

Performance Analysis Of Ethanol Blends On Various Parameter Of a  
4- Cylinder Internal combustion Engine      

2014

1. Refrigeration and Air-conditioning Laboratory

2. Workshop

3. CAD Lab.

4. FMHM Lab.

5. HT Lab.

6. I.C Engine Lab.

7. MD Lab.

8. MMC Lab.

9. Material Testing Lab.

10. Production Engg. Lab.
The Mechanical Engineering Department is involved in teaching, research and consultancy, as well as guiding project/thesis/dissertation students at all UG & PG levels. Mechanical Engineering Department also has an "ME Association" that is responsible for conducting the co-curricular activities for Mechanical Engineering students. Several invited talks by eminent academicians, scientists and experts were conducted so far under the aegis of ME Association. Realizing the importance of learning beyond class rooms, the department encourages students to indulge in co-curricular activities. Some of the important activities in which students have participated and accomplished are given below.

1) One day National Seminar on Materials Technology (NSMT-15) was organized by Mechanical Engineering Department on January-2015. This program was attended by faculty members and students of various technical institutions of the state. The seminar focused on the recent trends and advances in the field of Composite Materials, Manufacturing and Management of Mechanical Engineering. The seminar was intended to bridge the gap between the Institution and Industry. The teaching fraternity interacted with the industry personal and expressed their willingness towards the need of such programs and attending such programs in future for keeping themselves updated to the real life happenings.

2) A project work entitled “Enrichment of biogas produced from kitchen wastes by water scrubbing method and bottling for cooking applications” has been sent under UG student project proposal for the year 2014-2015 to different funding agencies of Renewable Energy. This project is guided by Prof. N.H.S.Ray, H.O.D. Department of Mechanical Engineering.
3) Several students have presented their project work in different seminars and conferences.

4) CAD centre CIPET conducts 100 hours Add-on courses for the students of 4th semester Mech. Engg. in the DIGITAL Lab. About 60 students participate in the programme.
5) Many Mechanical Engineering Students of the final year are already placed in different companies, many of them in the core Mechanical Engineering companies.

6) To enhance the technical skills among the students and make them fit for placement as per the requirements of rapidly growing industry, 10 weeks induction program on Fundamentals of Mech. Engg. are organized from 7st Jan -15 by the Department of Mechanical Engineering.

7) On the occasion of Teacher’s Day on 5th September 2014, students of Mechanical Engineering Department had organized a small function to show their respect and love towards their Teachers who have supported and inspired them and has made impact for a lifetime.

8) Students and Staff actively participated in all the competitions organized by Mechanical Engg.Department. for the Tech Fest Akhyansh- 2015.

9) 6th semester students of Mechanical Engineering had an Industrial visit to OSL, Paradeep on dated 13th Mar'2015.The visit to ship and PPL etc. were arranged by OSL.

10) The fresh batch of students was given a warm welcome by their seniors.5th semester students of Mechanical Engineering Department arranged a grand welcome function for them on 2014 in Suryansh Hotel. There was briefing about the departmental activities by Head of the department. It was followed by games, introduction of fresher’s and quiz competition .The function concluded with a sumptuous lunch.

11) Society of Automobile Engineers (SAE) has been holding a student formula car competition for many years, in which various teams from different organizations compete with cars designed and built by them. Student team of Mech.Engg.CEB is one of them which participated in the competition held at IIT, Madras in 2014.

Research Publications of N.H.S.Ray

1) N.H.S.Ray, M.K.Mohanty, R.C.Mohanty, “Biogas Production from Kitchen Wastes: A source of Renewable Energy “Proceedings of the 1st International Conference on Advances in Thermal and Energy Systems (AITES-2013).

2) N.H.S.Ray, M.K.Mohanty, R.C.Mohanty, “Biogas Production from Kitchen Wastes: A source of Renewable Energy and its’ application as alternate fuel in I.C Engines “Paper presented in all India seminar on Recent Advances in Thermal Engineering organized by KII and IE Bhubaneswar State Centre on 11-12 January-2014.

3). N.H.S.Ray, M.K.Mohanty, R.C.Mohanty, “Biogas as Alternate Fuel in Diesel Engines: A Literature Review”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), e-ISSN: 2278-1684, p-ISSN: 2320-334X, Volume X, Issue X (Sep. - Oct. 2013), PP 01-00 www.iosrjournals.org.

4) N.H.S.Ray, M.K.Mohanty, R.C.Mohanty, “A Study on Application of Biogas as fuel in Compression Ignition Engines”, International Journal of Innovations in Engineering and Technology (IJIET) ,Vol. 3, Issue 1 ,October 2013 ,ISSN: 2319 – 1058.

5). N.H.S.Ray, M.K.Mohanty, R.C.Mohanty, “Anaerobic Digestion of KitchenWastes:Biogas Production and Pretreatment of Wastes, A Review” International Journal of Scientific and Research Publications(IJSRP), Volume 3, Issue 11, November 2013, ISSN 2250-3153, www.ijsrp.org.

6). N.H.S.Ray, M.K.Mohanty, R.C.Mohanty, “Biogas production from kitchen wastes; A source of renewable energy”, International journal of innovative research & studies (IJIRS), ISSN 2319-9725, November-2013, volume-2, issue-11.

7) N.H.S.Ray, M.K.Mohanty, R.C.Mohanty, “Anaerobic Digestion of Kitchen Wastes: “A study on Biogas Production and up gradation through purification”, International journal of innovative research & studies (IJIRS), ISSN 2319-9725, December-2013, volume-2, issue-12.

8) N.H.S.Ray, M.K.Mohanty, R.C.Mohanty, “Anaerobic Digestion of Kitchen Wastes: Biogas Production, Purification and Application in I.C Engines” International Journal of Latest Trends in Engineering and Technology (IJLTET), Vol. 3 Issue 3 January 2014 ISSN: 2278-621X.

9) S.Panda, N.H.S.Ray, “Landfill Stability and Integrity: the UK Design Approach” International Journal of Engineering Science Invention (IJESI), ISSN (Online): 2319 – 6734, ISSN (Print): 2319 – 6726, www.ijesi.org, Volume 3 Issue 2 || February 2014 || PP.24-34 www.ijesi.org.

10) B.S.Sahani, N.H.S.Ray, “Characterization and treatment of grey water using Sequence Batch Reactor”, International journal of innovative research & studies (IJIRS), ISSN 2319-9725, May-2014, volume-3, issue-5.

11) S. Panda, N.H.S.Ray, “A Study on Interface Shear Strength Variability and Probability of failure of Land Filled Stability Analysis” International Journal of Engineering Sciences & Research Technology (IJESRT), ISSN: 2277-9655, volume-3, issue-6, June-2014.

12) S.Panda, N.H.S.Ray, “An Investigation on Behavior of Centrally Loaded Shallow Foundation on Sand Bed Reinforced with Geogrid” International Journal of Engineering Research and General Science(IJERGS),Vol.2 Issue 4 June-July 2014,ISSN 2091-2730,www.ijergs.org.

13). N.H.S.Ray, P.R.Swain, M.K.Mohanty, “AN INVESTIGATION ON PERFORMANCE CHARACTERISTICS OF C.I ENGINE USING BIOGAS AND DIESEL IN DUAL FUEL MODE” International Journal of Science, Engineering and Technology Research (IJSETR), ISSN: 2278 – 7798, Vol-3, Issue-7, July-2014.

14) B.S.Sahani, N.H.S.Ray, “A Comparative Study of Reactive Powder Concrete (RPC) and Ordinary Portland Cement (OPC) by Ultra High Strength Technology”, International Journal of Research (IJR), Vol-1, Issue-6, July 2014, ISSN 2348-6848.

15) S. Panda, N.H.S.Ray, “A STUDY ON BEHAVIOUR OF CENTRALLY LOADED SHALLOW FOUNDATION ON SAND BED REINFORCED WITH GEOGRID, FAILURE AND IMPROVEMENT: A LITERATURE REVIEW”, International Journal of Science, Engineering and Technology Research (IJSETR), Volume 3, Issue 7, July 2014, 1896 ISSN: 2278 – 7798.

16) S. Panda, N.H.S.Ray, “An Investigation on Design Procedure and Operations of Polymer Fibre Reinforced Concrete Pavements”, International Journal of Research (IJR), Vol-1, Issue-7, August- 2014, ISSN 2348-6848.

17) N.H.S.Ray, P.R.Swain, M.K.Mohanty, R.C.Mohanty “'Biogas Production from Kitchen Wastes: its Purification and Application in C.I Engine in dual fuel mode”, International Journal of Research (IJR), Vol-1, Issue-7, August- 2014, ISSN 2348-6848.

18) N.H.S.Ray, P.R.Swain, M.K.Mohanty, R.C.Mohanty, “A Case Study of Biogas Upgradation by Water Scrubbing: Laboratory Model for Purification and Effective Storage in LPG Cylinders for Cooking Applications” International Journal of Advanced Engineering Research and Science (IJAERS), Vol-1, Issue-7, Dec. – 2014, ISSN: 2349-6495.

Conference /Seminar proceeding publications of N.H.S.Ray

1) N.H.S.Ray, M.K.Mohanty, R.C.Mohanty,”Biogas production from kitchen wastes: A source of renewable energy” Proceedings of 1st International conference on Advances in Thermodynamics and Energy Systems (AITES-13), pp72-77, August-2013.

2) N.H.S.Ray, M.K.Mohanty, R.C.Mohanty, “Biogas Production from Kitchen Wastes: A source of Renewable Energy and its’ application as alternate fuel in I.C Engines “Paper presented in all India seminar on Recent Advances in Thermal Engineering (RATE-14),organized by KIIT and IE Bhubaneswar State Centre on 11-12 January-2014.

3. S. Panda, N.H.S.Ray, “Polymer Fibre Reinforced Concrete Pavements: A RCC Design”, Proceedings of National Seminar on Materials technology (NSMT-15), pp 1-7.January-2015.

4) P.K.Mishra, T.K.Mall, P.R.Swain, N.H.S.Ray, “Parametric optimization of Abrasive Jet Machining using Taguchi Method” Proceedings of National Seminar on Materials Technology (NSMT-15), pp 12-17, January-2015.

Publications of Alok Kumar Nanda

1) Alok Ku Nanda, Soumya Dash, R. Bhima Rao, Satya Sai Srikant, “Assessment of the Performance of Pelton Turbine Test Rig Using Response Surface Methodology” International Journal: www.tujest.com

Publications of NAYANJYOTI BAISHYA

1) MrutyunjayRout, Nayanjyoti Baishya (2010), “Effects of delamination on the vibration characteristics of composite beams”, Noise & Vibration Worldwide, 41 (3)

Publication of Tapan Kumar Mall

1) P.K.Mishra, T.K.Mall, P.R.Swain, N.H.S.Ray, “Parametric optimization of Abrasive Jet Machining using Taguchi Method” Proceedings of National Seminar on Materials Technology (NSMT-15), pp 12-17, January-2015.

Publication of Tapas Kumar Chand

1. T.K.Chand, M.K.Mohanty, R.C.Mohanty, “A Compact Review of Composite material” Proceedings of National Seminar on Materials Technology (NSMT-15), pp 20-25, January-2015.

LIST OF PUBLICATIONS by Prof. S.K.Khuntia

A ) INTERNATIONAL JOURNAL

1) B. B. Pani, S. K. Khuntia- “Studies on Rapidly solidified High carbon content ferrous powders for Manufacturing structural components”, Manufacturing Technology and Research, An International Journal, Vol. 5(3&4), 2009, pp.17-20.

2) S. K. Khuntia, B. B. Pani &R. R. Dash-“Production and Characteristic Studies of Iron Powder from Sponge Iron Fines using Electrolytic and Atomised Method”, International Journal of Advanced Materials Science, Vol.2(2), 2011, pp.243-248.

3) S. K. Khuntia, B. B. Pani & R. R. Dash, “Processing and Characterization of Chromium and Silicon Alloyed Rapidly Solidified High Carbon Content Ferrous Powders”, Powder Metallurgy Progress, Vol. 12 (4), 2012, pp.211-218.

B ) NATIONAL JOURNAL

1) B. B. Pani, S. K. Khuntia & R. R. Dash- “Low cost & energy efficient method of manufacturing Ferrous based particulate reinforced composites”, Technoinsight, a National Journal, August 2009, Vol.I, August 2009, pp-15-16.

2) B. B. Pani, S. K. Khuntia-“A Review on processing, properties and application of Ultra High carbon content ferrous Alloys”, Technoinsight, A national journal, Vol. II, Feb. 2010, pp -24-28 .

3) C. R. Mohanty, B. B. Pani, S. K. Khuntia-“Environment Management in DRI steel plants”, e-planet, a complete journal on environment, Vol. 8 (2), July 2010, pp 14-19.

4) C. R. Mohanty, B. B. Pani, S. K. Khuntia-“Economic analysis of waste heat recovery system in sponge iron plants”, e-planet, Vol.10 (1), January 2012, pp. 53-56.

5) B. B. Pani, S. K. Mohapatra, S. K. Khuntia, “Neural Network Programming for prediction of process parameters for rapidly solidified high carbon content ferrous powder”, Transactions of Powder Metallurgy Association of India(PMAI), Vol.38, 2012, pp 21-25.

CONFERENCE/SEMINAR Presented by Prof. S.K.Khuntia

1) B.B.Pani, S.K.Khuntia, B.K. Nanda, Powder metallurgy based sintered composites, national seminar AMTMA- 2007, by NMIET, Bhubaneswar.

2) B.R. Mohapatra, S.K. Khuntia, Dual benefits of migration and adaptation to climate change through decentralized renewable energy in rural landscapes, National Seminar on Climate change issues & Mitigation Priorities Feb. 28-March 2, 2009 by Satyasai Charitable & Educational Trust & NM Institute of Engineering & Technology, Orissa.

3) Dr. M.R. Senapati, S.K. Khuntia – “Management and Quality Control in Technical Education –An Overvies”, National Conference on Quality Assurance in Technical Education 28-29 March, 2009 by KEC, Bhubaneswar.

4) B.R. Mohapatra, M.R. Senapati, S.K. Khuntia- “Nanotechnology envoys cancer” National Seminar on Nano Technology & its Application, 17-18 July, 2009 by SIET, Dhenkanal.

5) B.R.Mohapatra,S.k.Khuntia,B.Mallick-Overview and Analysis of Climate Change on oceans and collected case studies, National conference on Advances in Environmental Engineering(AEE-09),14-15,Nov,2009 by NIT, Rourkela

6) S.K.Khuntia,S.Punaykanti,G.Rath,B.B.Pani-Cost Reduction by Energy saving in ferrous powder & steel production process, International Symposium on Energy & Environment 15-16 January 2010 by NMIET,Bhubaneswar

7) S.K.Khuntia, B. R. Mohaptra- Education ,Employment & changeover of Employment in present Global Scenario, 13 th annual convention of ISTE Odisha section and national seminar on Technical education: Current status and future prospects, 15th January 2011 by NMIET,Bhubaneswar

8) B. R. Mohaptra ,S.K.Khuntia,-Superconducting materials of high field applications, National conference on Plastics & Composites,29th January2011 by NMIET,Bhubaneswar

9) B.B.Pani, S.K.Khuntia,Processing of Ultra High Carbon Steels-from ancient Indian wootz steels to modern high performance components, national seminar on recent advances in manufacturing technology ,8th&9th sept.2012 by TAT, Bhubaneswar.

10) R. Mohaptra, S.K.Khuntia, “Ethical essence of Science and Technology”, National seminar on Bio gas and Biofuel as alternative source of energy, 27th August, 2013 by NMIET, Bhubaneswar.

11) R.K.Dash, B.R.Mohapatra, S.K.Khuntia, “Role of magnets in computing”, National conference on advances in computing and its application, 24th September 2013, by NMIET, Bhhubaneswar.

12) S.C.Mishra,B.R.Mohapatra,S.K.Khuntia, “Nano Magnetic Materials”,National seminar on Science & Technology for Human development,5th &6th December 2014 by Siksha ‘O’ Anusandhan University, on the occasion of 17th Odisha Bigyan Congress, in collaboration with the Indian science Congress Association Bhubaneswar Chapter and Orissa Environmental Society, Bhubaneswar.

The Department of Mechanical Engineering has its own library in addition to the Central Library of the Institute. The library is exclusive to the faculty members of Mechanical Engineering. The library regularly updates its inventory with the latest developments in Mechanical Engineering Research. The library holds books and materials relevant to class work, research work and also for competitive examinations. The library holds over 125 books of renowned authors.
2010-2011 SC M F ST M F OBC M F GEN M F
MECH 8 8 NIL 11 11 NIL 9 8 1 11 8 3
2011 -2012 SC M F ST M F OBC M F GEN M F
MECH 13 11 2 12 12 NIL 21 21 NIL 15 11 4
2012 -2013 SC M F ST M F OBC M F GEN M F
MECH 17 14 3 8 8 NIL 36 34 2 13 9 4
2013 -2014 SC M F ST M F OBC M F GEN M F
MECH 21 18 3 12 12 NIL 37 36 1 15 11 4
2011 – Pass out Batch
Sl.no. Programme No. of students appeared No. of students passed Pass percentage

1

Mech. Engg.

101

100

99.01

2012 – Pass out Batch
Sl.no. Programme No. of students appeared No. of students passed Pass percentage

1

Mech. Engg.

99

96

96.97

2013 – Pass out Batch
Sl.no. Programme No. of students appeared No. of students passed Pass percentage

1

Mech. Engg.

132

131

99.24

2014 – Pass out Batch
Sl.no. Programme No. of students appeared No. of students passed Pass percentage

1

Mech. Engg.

145

143

98.62

NAME BATCH COMPANY
RANSINGH SATYAJIT RAY 2011 ADANI GROUP
BINOY BHUSAN PATI 2011 ADANI GROUP
RUPESH RANJAN BISWAL 2011 ADANI GROUP
SWAROOP PANDA 2011 ADANI GROUP
MANAS KUMAR PATNAIK 2011 ADANI GROUP
DEBADUTTA SAHU 2011 GENESYS
RAKESH KUMAR 2011 GENESYS
SANTOSH KUMAR SUMAN 2011 GUPTA POWER
ABINASH SAMAL 2011 Indo-US MIM Tec
PRIYABRATA SAHU 2011 Indo-US MIM Tec
DEBASHIS DAS 2011 Indo-US MIM Tec
VASUNDHARA PANIGRAHI 2011 Indo-US MIM Tec
CHINMAYEE KAR 2011 Indo-US MIM Tec
PRADEEP KUMAR 2011 Indo-US MIM Tec
PRANTA PATHEYA ROUT 2011 Indo-US MIM Tec
CHINMAYA RATH 2011 Indo-US MIM Tec
SAMITA NAYAK 2011 Indo-US MIM Tec
DEBIPRASAD MOHANTY 2011 INFOSYS 
ASHIRVAD DAS 2011 INFOSYS 
ABHIPSA MOHANTY 2011 INFOSYS 
SANGEETA MUDULI 2011 INFOSYS 
TRIDEEPTA SAR 2011 INFOSYS 
TITIKSHYA BISWAL 2011 INFOSYS 
ANOOP KUMAR PANIGRAHI 2011 INFOSYS 
PULKIT MAHESHWARI 2011 INFOSYS 
ABHINASH JAGDEV 2011 INFOSYS 
INDRAJEET MOHANTA 2011 KMC Construction Ltd.
DEVEN MODI 2011 KMC Construction Ltd.
SANJEEB KUMAR SAHOO 2011 KMC Construction Ltd.
TOKHAN KUMAR 2011 KMC Construction Ltd.
ABHISHEK KUMAR 2011 KMC Construction Ltd.
ABINASH PATRI 2011 L&T ECC
DILLIP KUMAR SWAIN 2011 PRADAN
BIPIN KUMAR PADHAN 2011 PRADAN
AMRESH KUMAR TIWARI 2011 ROHIT FERRO TECH 
VED PRAKASH 2011 SHRIRAM VALUE 
BADAL KUMAR SAHU 2012 BOSCH
PREETI KOMMANA 2012 CUMMINS
SOUMYA PATRA 2012 CUMMINS
SWATI SUMAN DASH 2012 Cummins
SHALINI MOHANTY 2012 CUMMINS
NEERAJ KUMAR PATRALEKH 2012 EDAC ENGINEERING LTD
SUDHIR KISHORE 2012 EDAC ENGINEERING LTD
SHASHI RANJAN 2012 EDAC ENGINEERING LTD
LOPAMUDRA RATH 2012 EDAC ENGINEERING LTD
ANANYA MOHAPATRA 2012 EDAC ENGINEERING LTD
DIBYA KISHOR PATEL 2012 EDAC ENGINEERING LTD
ANSHUMAN KUMAR SAHU 2012 EDAC ENGINEERING LTD
SASWAT MOHANTY 2012 EDAC ENGINEERING LTD
MANOJ KUMAR  2012 EDAC ENGINEERING LTD
SUBHRAKANTA BARIK 2012 EDAC ENGINEERING LTD
SAGUFTA NAZEEM 2012 EDAC ENGINEERING LTD
VIKASH KUMAR 2012 EDAC ENGINEERING LTD
ABHISEK PANIGRAHI 2012 EDAC ENGINEERING LTD
BIKASH KUMAR NAYAK 2012 EDAC ENGINEERING LTD
GURU PRASAD BRAHMA 2012 HCL-BUSINESS SERVICES
SANTOSINI PANDA 2012 HCL-BUSINESS SERVICES
TAPAS KUMAR 2012 INFOSYS
RAVI KUMAR  2012 INFOSYS
SUDEEP GHOSH 2012 INFOSYS
SALIBHA MISHRA 2012 INFOSYS
PRITI PRIYAMBADA SATAPATHY 2012 INFOSYS
BISWAS MOHANTY 2012 INFOSYS
KARAN BAMRAH 2012 INFOSYS
JITESH RAWAL 2012 INFOSYS
SUPRIYO PATTNAIK 2012 INFOSYS
BIJAY AGARWAL 2012 INFOSYS
SIDHARTH MISHRA 2012 INFOSYS
SUKANTA DUTTA 2012 L&T ECC
SUMIT KUMAR JAISWAL 2012 L&T ECC
BISWAJIT BARDHAN ROY 2012 L&T ECC
ASHISH KUMAR BEHERA 2012 PIAGGIO
K DINESH  2012 PIAGGIO
SAMBIT MOHANTY 2012 ROHIT FEROTECH 
SAURABH KUMAR 2012 SEW
RAKESH KUMAR  2012 SEW
ASHUTOSH KUMAR  2012 SEW
PRASHANT KUMAR PRABHAKER 2012 SHRIRAM VALUE SERVICES
MINATI PANDA 2013 HYMA PLATES & VESSELS PRIVATE LIMITED
ABHIJEET KUMAR 2013 HYMA PLATES & VESSELS PRIVATE LIMITED
UJJWAL KUMAR ROSHAN 2013 HYMA PLATES & VESSELS PRIVATE LIMITED
SUJIT KUMAR PATEL 2013 HYMA PLATES & VESSELS PRIVATE LIMITED
SHANTANU KUMAR MOHAPATRA 2013 HYMA PLATES & VESSELS PRIVATE LIMITED
ADITYA BIKRAM PATNAIK 2013 HYMA PLATES & VESSELS PRIVATE LIMITED
MANISHA KUMARI GOUDA 2013 HYMA PLATES & VESSELS PRIVATE LIMITED
SUBRAT KUMAR ROUT 2013 HYMA PLATES & VESSELS PRIVATE LIMITED
IPSITA BEHERA 2013 INFOSYS
SIDDHARTH SEKHAR PANDA 2013 INFOSYS
ANANYA SAMANTARA 2013 INFOSYS
ALISHA SATPATHY 2013 INFOSYS
BARSHA DASH 2013 INFOSYS
VISHAL NEOGI 2013 INFOSYS
AMRESH KUMAR 2013 JARO EDUCATION 
SAMIR KUMAR MITRA 2013 L&T ECC
SREEYA SARBANI 2013 Phillips Carbon Black Limited (PCBL)
SHUBHASAMBIT PRADHAN 2013 Phillips Carbon Black Limited (PCBL)
LATAKANTHI PRADHAN 2013 RUPAL ELECTRONICS PRIVATE LIMITED
MD.SAJID HUSSAIN ANSARI 2013 RUPAL ELECTRONICS PRIVATE LIMITED
ALOK KUMAR SAKSENA 2013 RUPAL ELECTRONICS PRIVATE LIMITED
RAKESH KUMAR 2013 RUPAL ELECTRONICS PRIVATE LIMITED
SOUMYA RANJAN NAYAK 2013 RUPAL ELECTRONICS PRIVATE LIMITED
HALDHAR GIRI 2013 RUPAL ELECTRONICS PRIVATE LIMITED
STHITIPRANGYA BISWABHUSAN BHATTA 2013 RUPAL ELECTRONICS PRIVATE LIMITED
NARENDRA KUMAR BEHERA 2013 RUPAL ELECTRONICS PRIVATE LIMITED
HIMANSU ROUT 2013 RUPAL ELECTRONICS PRIVATE LIMITED
HARI SHANKAR SAHOO 2013 RUPAL ELECTRONICS PRIVATE LIMITED
ASHISH KUMAR AGRAWAL 2013 RUPAL ELECTRONICS PRIVATE LIMITED
SHRABANI PANIGRAHI 2013 RUPAL ELECTRONICS PRIVATE LIMITED
LEKHRAJ PRASAD SAHU 2013 RUVA INFO
PRABHAT SAXENA 2013 RUVA INFO
SARMISTHA MOHANTY 2013 SIS Pvt Ltd
SANJAYA KUAMR SWAIN 2014 ABELLON CLEAN ENERGY
KISHORE MRINAL  2014 ABELLON CLEAN ENERGY
SURAJ KUMAR SINGH  2014 ABELLON CLEAN ENERGY
MANISHA SINGH  2014 GENPACT
SHEKHAR SINHA  2014 GENPACT
ABHAY KUMAR JHA  2014 IMCO ALLOYS
ABHIJEET PATTNAYAK 2014 IMCO ALLOYS
DILIP KUMAR 2014 IMCO ALLOYS
VICKY KUMAR SINGH  2014 IMCO ALLOYS
PRATIK PATNAIK  2014 INFOSYS
SHIVANAND ROY  2014 INFOSYS
AMLAN DEHURY  2014 JOHN ENERGY
BISWAJIT NATH SHARMA  2014 JOHN ENERGY
SUBHASH KUMAR 2014 JOHN ENERGY
DACTOR PALAI 2014 JOHN ENERGY
SHRADHANANDA GIRI 2014 OFOS
SUBHASISH PADHI 2014 OFOS
JAYARAM SAHU 2014 OFOS
ALOK KUMAR THAKUR 2014 OFOS
ASHIS RAY  2014 OFOS
AVIJIT CHAKRABORTHY  2014 OFOS
PRIYADARSHI CHIRASUNDER SAHU  2014 OFOS
VED PRAKASH SINGH  2014 OFOS
VIVEK KUMAR SHRIVASTAVA  2014 OFOS
TOSIP PAUL 2014 OFOS
HIMANSHU SHEKHAR ROY 2014 OFOS
DEVI PRASAD SAMAL  2014 SPM Autocomp Systems
ALFAHAD NAWAZ  2014 SSEPL (PNB UTENSILS) 
PRANAY ANAND  2014 SSEPL (PNB UTENSILS) 
ANKEET KUMAR GHADAI 2014 SSEPL (PNB UTENSILS) 
CHINMAYANANDA BARIK 2014 SSEPL (PNB UTENSILS) 
ROHIT KUMAR 2014 STANVAC
NITISH KUMAR 2014 STANVAC
RAHUL KUMAR TIWARY  2014 STANVAC
SHATRUNJAY KUMAR  2014 STANVAC
SUSHREE PRADHAN  2014 STANVAC
UJJAL KUMAR  2014 STANVAC
SOUMYA RANJAN TRIPATHY 2014 TCS
ADARSHA MEHER 2014 TECH MAHINDRA
DIBYA RANJAN BAL  2014 TECH MAHINDRA
JITENDRA KUMAR BAJPAI 2014 TECH MAHINDRA
2011 PASSED OUT BATCH
2007-2011

Courses

No of Students Appeared

Number of student placed

% placed

Mechanical

96

73

76.04

2012 PASSED OUT BATCH
2008-2012

Courses

No of Students Appeared

Number of student placed

% placed

Mechanical

85

71

83.52

2013 PASSED OUT BATCH
2009-2013

Courses

No of Students Appeared

Number of student placed

% placed

Mechanical

104

87

83.65

2014 PASSED OUT BATCH
2010-2014

Courses

No of Students Appeared

Number of student placed

% placed

Mechanical

96

82

85.41

Mission

1) Imparting quality education to the students and enhancing their skills to make them globally competitive mechanical engineers.
2) Maintaining vital, state-of-the-art research facilities to provide its students and faculty with opportunities to create, interpret, apply and disseminate knowledge.
3) To develop linkages with world class R&D organizations and educational institutions in India and abroad for excellence in teaching, research and consultancy practices.

Vision

“The Mechanical Engineering Department strives to be recognized globally for outstanding education and research leading to well-qualified engineers, who are innovative, entrepreneurial and successful in advanced fields of engineering and research”

Objectives

1. To develop and maintain a strong academic staff base for optimum departmental performance.
2. To integrate teaching and research for preservation and effective application of knowledge and skills.
3. To improve, develop and establish teaching and research programs in line with country’s industrialization needs.
4. To develop and promote quality and market driven academic and professional pursuits.
5. To expand, strengthen and sustain the departmental income base.
6. To strengthen and expand collaboration and partnerships with industry and other organization.
7. To establish culture of hard work, good governance in leadership and management of the department.
8. To develop, promote and carry out programs for epidemic and disaster prevention as well as risk management.